The Bronson Outdoor MBL series of LiFePO4 batteries is specially designed to provide a reliable and secure power source for demanding outdoor activities.
Equipped with cutting-edge lithium battery technology, the MBL LiFePO4 batteries offer high energy density in a compact and portable housing. The battery pack is protected with a EVA foam layer and enclosed in a dust and waterproof case, turning the MBL lithium-ion battery into a robust product that can be used in any outdoor environment. By using plug-in waterproof connectors operating the MBL is very easy and safe. Lightweight and with a non-slip rubber handle makes it comfortable to carry, transport and install.
A very modern BMS (Battery Management System) ensures additional safety while using the MBL with features such as short circuit, overload and overvoltage protection. At the same time, the BMS maintains the cells working efficiently by automatically balancing them out, optimising discharge cycles and preserving battery life span.
The perfect leisure battery for outdoor activities
Enjoy your hobby and don’t worry about your battery during your time-off.
Light: despite strong performance, the MBL weighs only a fraction of a conventional lead-acid battery.
Durable: with at least 2000 charge cycles at original capacity, the MBL is significantly more durable than a traditional gel or acid battery.
Efficient: optimised charging and discharging reduces wasted power.
Robust: the extremely durable outdoor case is dust and water resistant (protection class IP67).
Temperature resistant: the MBL can be used within a temperature range of -20 ºC to +75 ºC, and therefore usable in almost every region and every season.
USB connection: while using the battery, another device can be connected and charged in parallel.
Precise charge status: displayed with 5 LEDs, each one corresponding to approximately 20% of charge level.
Low charge indication: all 5 LEDs will start to blink when the charge level drops below 10%.
Battery management system: enhanced safety through protection against overload, overvoltage, deep discharge, high temperature and short circuits. It also helps to maintain a healthy battery life through automatic cell balancing.
Chemistry
The MBL battery uses lithium iron phosphate (LiFePO4) cells. They have become one of the most popular battery types for powering devices due to their high power density, durability and lightweight.
LiFePO4 is mainly being used in leisure batteries. Having similar nominal voltage, the MBL presents a viable and environmentally-friendly power source opposed to the current lead-acid batteries. Not only do LFP batteries offer longer discharge cycles but also have a greater life span, even though they require a bigger initial investment.
How many charging cycles can the MBL maintain its original capacity?
The cells will hold their original capacity for at least 2000 cycles. This number can be increased or decreased depending on user behaviour, e.g., respecting operating and storing temperatures, not interrupt charging process, constantly overloading or deep charging the battery.
-
12V Marine Lithium Battery - MBL 100 LiFePO4 100Ah
Capacity: 100 Ah | Nominal voltage: 12.8V
Dims.: 355 x 305 x 165 mm | Weight: 12 kg
849.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
12V Marine Lithium Battery - MBL 36 - LiFePO4 - 36Ah
Capacity: 36 Ah | Nominal voltage: 12.8V
Dims.: 265 x 215 x 125 mm | Weight: 5 kg
420.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
12V Marine Lithium Battery - MBL 60 - LiFePO4 - 60Ah
Capacity: 60 Ah | Nominal voltage: 12.8V
Dims.: 320 x 270 x 155 mm | Weight: 7.5 kg
595.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
24V Marine Lithium Battery - MBL 8100 - LiFePO4 - 100Ah
Capacity: 100 Ah | Nominal voltage: 25.6V
Dims.: 415 x 345 x 205 mm | Weight: 23 kg
1,449.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
The Bronson LCL chargers convert incoming alternate current (AC) voltage into 14,6V DC (or 29,2V DC), which is the ideal charging voltage for charging 12V (and 24V) LiFePO4 batteries. Through solid design, the LCL series allows to reliably and efficiently charge the Bronson Outdoor MBL series in even the most challenging environments.
Using the LCL is simple: the plug needs to be connected to the MBL, and the power plug connects to the power supply. The charging cycle starts on a constant current charge and finishes in constant voltage mode.
The BMS (Battery Management System) installed in the MBL series collaborates with the LCL chargers monitoring and protecting the batteries during the whole charge cycle. On the one hand, the BMS automatically balances the cells out, maintaining overall battery health. On the other hand, the BMS will ensure cutting the battery from the charger when it’s fully loaded, avoiding overloading the battery. At the same time, the BMS will detect any defects on the charger and protect the battery from subsequent overcurrent or short circuits.
A perfect charger in a rough environment
The easy way to charge Lithium-Ion batteries.
Powerful: up to 40A charge current available
Rugged design: strong and solid cases protect the charger against impacts
Intelligent: the whole charge cycle is monitored and secured
Energy efficiency: modern PWM chipsets control the charging process
Wordlwide applicable: input voltage range between 100V and 240V AC
-
Battery Charger - LCL 12L - (12V 20Amp Lithium LFP)
Current: 20A | Charging voltage: 14.6V
Suitable for MBL60 and MBL100
135.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Battery Charger - LCL 12M (12V 10Amp Lithium LFP)
Current: 10A | Charging voltage: 14.6V
Suitable for MBL36, MBL60 and MBL100
62.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Battery Charger - LCL 12S - (12V 5Amp Lithium LFP)
Current: 5A | Charging voltage: 14.6V
Suitable for MBL36, MBL60 and MBL100
42.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Battery Charger - LCL 12X (12V 40Amp Lithium LFP)
Current: 40A | Charging voltage: 14.6V
Suitable for MBL100
255.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Battery Charger - LCL 24X - (24V 20Amp Lithium LFP)
Current: 20A | Charging voltage: 29.2V
Suitable for MBL8100
255.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
The Bronson Outdoor Starter Kits contain everything you need for your outdoor adventure.
If you are looking for an environmentally friendly alternative to lead-acid batteries and are ready to power your outdoor appliances with LiFePO4 batteries, we suggest you buy the Starter Kit. It comes with all the parts needed to provide you with a portable and safe power supply.
1x Bronson Outdoor MBL Battery
1x Bronson Outdoor LCL Charger
1x Bronson Outdoor WP50 Plug
-
Bronson Outdoor MBL 100 Fast Kit
Capacity: 100 Ah | Nominal voltage: 12.8V
Dims.: 355 x 305 x 165 mm | Weight: 12 kg
1,020.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Bronson Outdoor MBL 100 Standard Kit
Capacity: 100 Ah | Nominal voltage: 12.8V
Dims.: 355 x 305 x 165 mm | Weight: 12 kg
930.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Bronson Outdoor MBL 36 Fast Kit
Capacity: 36 Ah | Nominal voltage: 12.8V
Dims.: 265 x 215 x 125 mm | Weight: 5 kg
460.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Bronson Outdoor MBL 36 Standard Kit
Capacity: 36 Ah | Nominal voltage: 12.8V
Dims.: 265 x 215 x 125 mm | Weight: 5 kg
450.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Bronson Outdoor MBL 60 Fast Kit
Capacity: 60 Ah | Nominal voltage: 12.8V
Dims.: 320 x 270 x 155 mm | Weight: 7.5 kg
690.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Bronson Outdoor MBL 60 Standard Kit
Capacity: 60 Ah | Nominal voltage: 12.8V
Dims.: 320 x 270 x 155 mm | Weight: 7.5 kg
630.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
Bronson Outdoor MBL 8100 Kit
Capacity: 100 Ah | Nominal voltage: 25.6V
Dims.: 415 x 345 x 205 mm | Weight: 23 kg
1,550.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
Tools specially developed for outdoor activities
Through smart design, Bronson Outdoor Accessories provide user-friendly usability and allow many different applications. Their solid construction supports you in all your outdoor adventures. And being IP67 waterproof, the accessories are safe to use in the most adverse weather conditions.
-
WP 50 - 50Amp Female Waterproof Connector - 2 Pin Socket - Screw Connect Type
13.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days
-
WP 50 - Waterproof Connector - 50Amp - 2 Pin Male - Screw Connect Type
Max. continuous output: 50A
Voltage range: 0-500V | IP67 waterproof
13.00 €Incl. VAT
|
Free Shipping (DE)
1-2 days